Follow

Adding additional Coverage Unit(s)


You may or may not have noticed that your Network Unit and your Coverage Unit have matching serial numbers. This is part of the code that helps them talk to each other. This also is what keeps you from being able to add a second CU to an existing system.
The good news, you can add more than one complete system in the same building. Only a couple rules need to apply.
1. Place the CU's very far from each other. You would want to limit overlapping of coverage bubbles as much as possible. If they are too close to each other, they will start reducing each others coverage bubble sizes as to not interfere with each other.
2. Place the NU's at least arms reach (5-10 feet) away from each other. Same rule, to keep them from interfering with each other.
I have attached a document to help illustrate a real life case. Please feel free to reach out to me if you have any other questions. I am here to help!

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments