| LED Behavior | Translation/ Error State |
| No light | Device is powered OFF |
| Solid Orange | Device is powered ON |
| - | Device is booting up |
| Slow blinking green | Device is band scanning to acquire network signals |
| Solid Green | Device is operating normally and providing coverage |
| Solid Red | Hardware Error (Error 6) – Disconnect & Reconnect |
| Flash RED 1 time & OFF for 4 seconds | Device is not receiving signal from the cellular network (Error 1) |
| Flash RED 2 times & OFF for 4 seconds | Donor input signal is too strong for the device (Error 8) |
| Flash RED 3 times & OFF for 4 seconds | Device’s server antenna is too close to donor antenna (Too Close) |
| Flash RED 4 times & OFF for 4 seconds | Device is disabled by the operator (Error 7) |
| Flash RED 5 times & OFF for 4 seconds | Device location lock pending (Error 9) |
| Flash RED 6 times & OFF for 4 seconds | Device registration pending (Error 5) |
| Flash RED 7 times & OFF for 4 seconds | Device Self-Test Failed (Error 12) |
| Flash RED 8 times & OFF for 4 seconds | Device is overheating (Error 4) |
