The WAVE App is a free mobile app (iOS and Android) that's designed for end users, installers and channel partners to activate and manage Residential and Mobile CEL-FI boosters. The app connects to the device via Bluetooth and is available on smartphones and tablets. |
|
Downloads
Features
Operator Switching
When enabled by a system, this dropdown on the Settings tab allows you to change the network carrier (operator) to boost. A software package may be downloaded and installed to support the new carrier. The option may be disabled if you don’t have a cellular signal.
Mode Switching
If you are connected to a GO G31 or GO G32, you have the option to switch between Mobile and Stationary modes. Simply select the Mode from the Settings tab. A software package may be downloaded and installed to support the new mode.
Booster Settings
Some CEL-FI Boosters have configurable boost options. In that case, the booster will only relay according the method selected. Select by technology (3G, 4G) or by bands (and frequencies). CEL-FI’s default setting is “Automatic”. This simply means CEL-FI will automatically choose the best signal for you.
Registration
The Registration function is an optional feature that can be enabled by Mobile Network Operators. The Registration function captures the state and donor cell information of the CEL-FI system, along with information about the location where the device is being deployed and stores the data securely in the cloud.
Operators and regional telecom governing agencies may require signal boosters to be registered. The Registration application in WAVE simplifies and streamlines this process. Simply input the user’s name and address and the WAVE application will automatically collect the network conditions collected by the CEL-FI system at the time of registration and securely store it in the cloud. Information like donor cell ID’s coupled with geographical deployment information of CEL-FI systems can then be analyzed and visualized from within the WAVE portal.
Antenna Position Test
If you are using a CEL-FI supplied mounting bracket, you can use the Antenna Positioning feature to setup your external antennas. Capture measurements in up to 8 positions. The app will analyze the data and recommend the best direction to aim your antenna.
Frequently Asked Questions
Explore answers to commonly asked questions about our app.
Visit the WAVE App marketing page →