No Power – The unit is not lighting up
When your system does not power up, one of the following things could be happening. You could have a power adapter failure, a hardware failure, or the system could need a simple restart. Make sure that you power source is a functional outlet. Test something else, that you know works in the same outlet, or try moving the Cel-Fi GO to another outlet that you have confirmed has working power. Still Not Working? It is possible that you have a bad power supply, or malfunction of your Cel-Fi GO hardware. This is not something that should continue, but if it occurs frequently please reach out to your point of sale for support.
My Status Indicator is blinking green but my phone still have poor signal at the donor antenna
A blinking green status light indicates that your Cel-Fi GO is still in the startup process. Depending on the complexity of your cellular network, this process can take some time. If the units is still blinking for more than 30 minutes please attempt a restart. This is not something that should continue, but if it occurs frequently please reach out to your point of sale for support.
My Status Indicator is solid green but my phone still have poor signal at the donor antenna
If your Cel-Fi GO has a solid Status Indicator light in either yellow or green, the system is fully functional.
If your system has a solid (non-red) status light but your phone is not picking up a stronger cellular signal you might need to check the server antenna, make sure that your server antenna is fully functional. Try swapping out your server antenna with another antenna. If the issues persists please reach out to your point of sale for support.
My Status Indicator is flashing red
There are several reason why your status light would be flashing red. The best way to determine the specific reason for your flashing light is to use the WAVE Mobile application while connected to your device. Learn more about Cel-Fi WAVE.
My Status Indicator is solid red
There are several reason why your status light would be flashing red. The best way to determine the specific reason for your flashing light is to use the WAVE Mobile application while connected to your device. Learn more about Cel-Fi WAVE.
I’ve installed Cel-Fi but I do not see more bars on my phone
First try toggling airplane mode on your phone near the server antenna, this will allow your handset to have a fresh look at the available channels. Also verify that your phone is compatible with the channels that your Cel-Fi system is boosting (maybe your handset is “unlocked” and actually does not fully support all your current operator’s channels). iPhones can also show fewer “bars” of signal if the network is heavily loaded. Learn more about cellphone bars.
No LTE - My phone still doesn't have LTE
There are a few reasons why your phone would experience an issue with the LTE service. You may not have LTE in your area, your Cel-Fi system may have lost the LTE signal due to intermittent network outages, or your phone may not support LTE. Check to see that your phone shows an LTE signal in the location of your donor antenna.
No bars-My unit is not finding the cellular signal
If you have no bars, your unit may still be trying to find the cellular network. Your unit may display a blinking green power indicator, this can sometimes take more than a few minutes. If you have bars of service on your phone at the location of your donor antenna but not at the server antenna, after 60 minutes try a simple restart. To restart your unit simply unplug it for few seconds and then plug it back in. If the restart does not solve the issue please reach out to your point of sale for support.